[Healeys] Water Pump Pulley Nut

Michael MacLean springer.mike51 at gmail.com
Sun Jan 23 16:41:55 MST 2022


I only ask because the "improved" BN1/2 Water pump I bought came with a
wavy spring washer.  I changed it to a lock washer.  Thanks to the
collective wisdom of the list.  Just trying to eliminate as many problems
that may rear their ugly head on first startup of this engine.
Mike MacLean

On Sun, Jan 23, 2022, 1:27 PM Perry Small via Healeys <
healeys at autox.team.net> wrote:

>
>
> 
> 100 parts book shows a lock washer under the nut but no flat washer, bent
> or not.
> Perry
>
>
> -----Original Message-----
> From: Michael MacLean via Healeys <healeys at autox.team.net>
> To: Ahealey help <healeys at autox.team.net>
> Sent: Sat, Jan 22, 2022 5:43 pm
> Subject: [Healeys] Water Pump Pulley Nut
>
> Can someone tell me if the water pump pulley washer behind the center nut
> in the picture is supposed to be bent over as a lock?
> Mike MacLean
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive/healeys
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/springer.mike51@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220123/6e774156/attachment.htm>


More information about the Healeys mailing list