[Healeys] Hole Location

[Jean Caron]

I have brand new pieces and drilled the holes in them already and located them wher the old ones were I will take some measurements and send it to you as well.

Jean

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

From: Henry G Leach via Healeys<mailto:healeys at autox.team.net>
Sent: February 23, 2022 7:25 PM
To: 'Michael MacLean'<mailto:springer.mike51 at gmail.com>; 'healeys at autox.team.net'<mailto:healeys at autox.team.net>
Subject: Re: [Healeys] Hole Location

Mike-I may have sent you these photos. Here is the quarter location. What you need to find is an old backing piece (like this) to help locate.  Also, look in from the fender well with a good light and see if you can find the holes with filler in them. Hank

-----------------------------------------
From: "Michael MacLean via Healeys"
To: "Ahealey help"
Cc:
Sent: Wednesday February 23 2022 5:01:40PM
Subject: [Healeys] Hole Location
Does someone have a BN1/2 body with no interior?  I need the location for the six holes (three per side) to mount the top bows.  I asked for this several months ago, but most thought I was asking about location for fastener hardware to install the top to the frame.  I have no idea why these six holes behind the "B" pillar were filled in during body restoration.  I sent a request earlier with two pictures of the areas in question, but for some reason it did not get through.
Mike MacLean

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220224/55a3ea07/attachment.htm>