[Healeys] Mating a 6 cyl transmission to a BN1

[warthodson at aol.com]

I think you will require an engine back plate that fits the 6 cyl bellhousing & is drilled to fit the 4 cyl engine. I believe Dennis Welch sells them. The thickness of the back plate will affect how much the Trans. input shaft has to be shortened. 
Gary Hodson

-----Original Message-----
From: Ricchardd Mayor via Healeys <healeys at autox.team.net>
To: Alan Seigrist <healey.nut at gmail.com>
Cc: Healeys <healeys at autox.team.net>
Sent: Mon, Feb 21, 2022 3:28 pm
Subject: Re: [Healeys] Mating a 6 cyl transmission to a BN1

A BN2 bell housing will not give me a hydraulic clutch.
Richard MayorPortland, Oregonboyracer466 at gmail.com





On Feb 20, 2022, at 7:47 PM, Alan Seigrist <healey.nut at gmail.com> wrote:
Also you need the BN2 bellhousing.

On Mon, Feb 21, 2022 at 9:37 AM richard mayor <boyracer466 at gmail.com> wrote:

Does it mate up with little or no modification?
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com




_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220221/1f88f47f/attachment.htm>