[Healeys] Fuel pumps
m.g.sharp at sympatico.ca
m.g.sharp at sympatico.ca
Fri Apr 8 06:19:21 MDT 2022
Hi Ray, I’d be tempted to open the hole bit more and put a thin-wall sleeve down it and repair the cast in with metal epoxy putty. I like using “Faststeel”, but there are several makes out there. The stuff is quite amazing.
MIrek
From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Ray Juncal via Healeys
Sent: April 7, 2022 11:33 PM
To: List Healey <healeys at autox.team.net>
Subject: [Healeys] Fuel pumps
Anyone out there have a box of fuel pump parts? I have a rebuilt pump with a bad mounting hole in the lower casting. As you can see in the photos the casting has been damaged when someone drove a bolt that was too long into the casting and broke it. If you have a pump that is beyond repair I could use that casting. Everything else on this pump works fine.
Thanks
Ray
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220408/bb9582a5/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3396109 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20220408/bb9582a5/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 2950437 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20220408/bb9582a5/attachment-0003.jpg>
More information about the Healeys
mailing list