[Healeys] Sticker stock- machine shop labor

[Ricchardd Mayor]

My understanding is that today’s inflation is a worldwide phenomenon. I hope this is not being political.

  
Richard Mayor
boyracer466 at gmail.com


> On Apr 4, 2022, at 8:37 PM, WILLIAM B LAWRENCE via Healeys <healeys at autox.team.net> wrote:
> 
> Good call Alan. There seems to be some sensitivity on those topics here...
> From: Healeys <healeys-bounces at autox.team.net> on behalf of Alan Seigrist via Healeys <healeys at autox.team.net>
> Sent: Tuesday, April 5, 2022 3:04 AM
> To: jomar healey <ah53 at yahoo.com>
> Cc: S and T Miller <stmiller96 at hotmail.com>; healeys at autox.team.net <healeys at autox.team.net>
> Subject: Re: [Healeys] Sticker stock- machine shop labor
>  
> I guess I probably shouldn't make a political comment about inflation.  😁
> 
> 
> On Tue, Apr 5, 2022 at 9:20 AM jomar healey via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net>> wrote:
> I had a 100 head done about a year ago in North Jersey where prices tend to be higher and it came to about $600
> 
> Joe
> 
> On Monday, April 4, 2022, 08:06:14 PM EDT, S and T Miller via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net>> wrote:
> 
> 
> It's probably been 10 yrs since I last rebuilt an AH engine, so I might just be out of touch the rising costs. Has anyone recently had machine shop work done on a 100 engine and could you let me know if what I paid seems reasonable? I've had work done at this particular shop and consider them the best around, so the quality of work isn't questioned. Keep in mind I supplied all parts (valves, springs, guides, cam bearings,  freeze plugs, etc.). Also I delivered a disassembled engine, and I'm assembling the engine. 
> 
> Clean and machine stock flywheel $140
> 
> Head- cook, Magna Flux, replace guides, machine seats/ guides, resurface,  and assembly $510
> 
> Clean, Magna flux and resize rods $260
> 
> Clean/ grind crank and machine slinger area for rear seal kit $580
> 
> Block- cook, deck, install one cylinder sleeve, bore all 4, line bore mains, install cam bearings, install freeze plugs, machine lip off rear main cap for rear seal kit. $1,675
> 
> I know this is a loaded question,  and really just curious if these seem a bit inflated. When I Googled average costs, it seems high, but then again,  it's not a Chevy. 
> TY, Shawn
> 
> The Millers
>  
> "Always drive them, but remember each drive in an antique car is a test drive."
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys  <http://www.team.net/pipermail/healeys>http://autox.team.net/archive/healeys <http://autox.team.net/archive/healeys>
> 
> Healeys at autox.team.net <mailto:Healeys at autox.team.net>
> http://autox.team.net/mailman/listinfo/healeys <http://autox.team.net/mailman/listinfo/healeys>
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ah53@yahoo.com <http://autox.team.net/mailman/options/healeys/ah53@yahoo.com>
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys <http://www.team.net/pipermail/healeys> http://autox.team.net/archive/healeys <http://autox.team.net/archive/healeys>
> 
> Healeys at autox.team.net <mailto:Healeys at autox.team.net>
> http://autox.team.net/mailman/listinfo/healeys <http://autox.team.net/mailman/listinfo/healeys>
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com <http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com>
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220405/38e12aa0/attachment.htm>