[Healeys] Sticker stock- machine shop labor

Al Fuller alfuller194 at gmail.com
Tue Apr 5 20:21:29 MDT 2022


It sounds like you just did… 😊

 

Al Fuller

Fuller Compliance, Inc.

Quality Systems, Software Quality, Validation + 21 CFR Part 11

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Alan Seigrist via Healeys
Sent: Monday, April 04, 2022 11:04 PM
To: jomar healey <ah53 at yahoo.com>
Cc: S and T Miller <stmiller96 at hotmail.com>; healeys at autox.team.net
Subject: Re: [Healeys] Sticker stock- machine shop labor

 

I guess I probably shouldn't make a political comment about inflation.  😁

 

 

On Tue, Apr 5, 2022 at 9:20 AM jomar healey via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote:

I had a 100 head done about a year ago in North Jersey where prices tend to be higher and it came to about $600

 

Joe

 

On Monday, April 4, 2022, 08:06:14 PM EDT, S and T Miller via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote: 

 

 

It's probably been 10 yrs since I last rebuilt an AH engine, so I might just be out of touch the rising costs. Has anyone recently had machine shop work done on a 100 engine and could you let me know if what I paid seems reasonable? I've had work done at this particular shop and consider them the best around, so the quality of work isn't questioned. Keep in mind I supplied all parts (valves, springs, guides, cam bearings,  freeze plugs, etc.). Also I delivered a disassembled engine, and I'm assembling the engine. 

 

Clean and machine stock flywheel $140

 

Head- cook, Magna Flux, replace guides, machine seats/ guides, resurface,  and assembly $510

 

Clean, Magna flux and resize rods $260

 

Clean/ grind crank and machine slinger area for rear seal kit $580

 

Block- cook, deck, install one cylinder sleeve, bore all 4, line bore mains, install cam bearings, install freeze plugs, machine lip off rear main cap for rear seal kit. $1,675

 

I know this is a loaded question,  and really just curious if these seem a bit inflated. When I Googled average costs, it seems high, but then again,  it's not a Chevy. 

TY, Shawn

 

The Millers
 
"Always drive them, but remember each drive in an antique car is a test drive."

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys  <http://www.team.net/pipermail/healeys> http://autox.team.net/archive/healeys

Healeys at autox.team.net <mailto:Healeys at autox.team.net> 
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ah53@yahoo.com

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys

Healeys at autox.team.net <mailto:Healeys at autox.team.net> 
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20220405/9fb3845b/attachment.htm>


More information about the Healeys mailing list