[Healeys] tranny installation--BJ8

[richard mayor]

Can you be more specific?   Not sure why you even have the shifter still
attached.  It can poke you in the eye.   You just need to make sure the
tranny is in one of the gears so you can rotate the output shaft if
necessary to make the input shaft splines mate with the clutch splines.

On Tue, Sep 21, 2021 at 1:11 PM Tom Felts via Healeys <
healeys at autox.team.net> wrote:

> Try as two of us can, we could not get the tranny back in the car. Is
> there a specific position it has to be to mate?  I heard the shifter at
> about the 10 oclock position but that didn't seem to work.
>
>
>
> tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210921/36b69c7e/attachment.htm>