[Healeys] Clutch removal done.

[simon.lachlan at alexarevel.plus.com]

I have a most obliging friend who runs a garage about 100yds from our house.
I wandered down to pick his brains. He laughed when I suggested jamming the
engine with wood and produced a very clever little item. See attached. Bolts
to back plate of engine and, meshed with the flywheel, holds it still.

If I’d had to exert a lot of pressure on the bar to start the bolts moving,
I think I’d have stopped. Didn’t want to lose a tooth.

And, yes, an impact gun was the next step.

A very clever item indeed. I’d buy one except I hope never to do this job
again. (About £13:50 on UK eBay). Hope springs eternal.

But a good result and thanks for the all the advice. 

Simon.

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210903/64ea3058/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: For Holding Flywheel 1.JPG
Type: image/jpeg
Size: 468313 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210903/64ea3058/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: For Holding Flywheel 2.JPG
Type: image/jpeg
Size: 824414 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210903/64ea3058/attachment-0001.jpe>