[Healeys] Healey Shift Stick

[Perry Small]

No, if the two set screws are in the holes they will limit the movement of the shift lever, allowing fore and aft but not side to side. The tip should rest in the bottom of the slot in neutral.  
P

Sent from my iPhone

> On Oct 19, 2021, at 12:43 PM, rfbegani at gmail.com wrote:
> 
> Great picture, thanks.. So you are indicating that the tip should  enter the
> hole in the shaft?
> 
> -----Original Message-----
> From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Perry Small via
> Healeys
> Sent: Tuesday, October 19, 2021 8:36 AM
> To: Healeys <healeys at autox.team.net>
> Subject: [Healeys] Healey Shift Stick
> 
> Bolt - including tip- 3/4 inch thread below head Tip - diameter 0.20 inch
>          Length  0.25 inch
> 
>