[Healeys] BN2 Fan Belt

Alan Seigrist healey.nut at gmail.com
Sun Oct 17 20:24:47 MDT 2021

Actually for these I get the machinery/tractor belts made by Mitsuboshi.
Mitsuboshi RECMF-8440 is a perfect fit toothed belt on the 100.  It sits
very loose on the pulley and grips very nicely.



On Sun, Oct 17, 2021 at 8:53 AM Bob Spidell <bspidell at comcast.net> wrote:

> I finally got around to fixing my loose water pump pulley and installing a
> new fan belt. I ordered a 'cogged' belt from Moss--part# 021-966--thinking
> it might work better than the original slab of rubber. I noticed before
> installing that it was narrower than the original type that I'd had, which
> had rotted, but it looked like it would work. Once I started tensioning it
> however, it was clear it *might *work, but sat too low in the pulleys,
> and was essentially riding on the bottom of the pulley grooves instead of
> on the sides (and the angle of the sides of the belt was incorrect). Anyone
> else tried one of these?
> I'm shocked, SHOCKED I TELL YA', that a vendor would sell something that
> could possibly work, but isn't truly correct.
> bs
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211018/56d498c6/attachment.htm>

More information about the Healeys mailing list