[Healeys] BN2 Fan Belt

Bob Spidell bspidell at comcast.net
Sun Oct 17 10:58:10 MDT 2021


It was suggested to me that the cogged belt is /designed /to grab the 
bottom of the pulley, instead of the sides. This makes some sense, any 
industrial engineers know the 'theory' on this.

One thing is for sure, the cogged belt "don't /look/ 'right,'" at least 
not compared to original.


On 10/17/2021 8:13 AM, Michael Salter wrote:
> As I recall the original belt for a 100 is a Ferodo V161.
>  I have been using a B-45 Gates belts which sit a little lower in the 
> pulley but don't contact the bottom of the pulley groove.
> https://www.biedlers-belts.com/gates-b45-belt.html 
> <https://www.biedlers-belts.com/gates-b45-belt.html>
>
> M
>
>
> On Sun., Oct. 17, 2021, 10:16 a.m. David P via Healeys, 
> <healeys at autox.team.net <mailto:healeys at autox.team.net>> wrote:
>
>     Gates belts has a belt for industrial equipment (non automotive)
>     that is an excellent copy of the original. Unfortunately I don't
>     remember the part number.. (gets worse with age). I found it
>     googling their web pages.. B1 kinda rings a bell.. happy hunting.  DP
>
>     On 10/17/2021 8:01 AM, Bob Spidell wrote:
>>     I'm going to return it, with '8x10 colored glossy photographs.'
>>
>>
>>     On 10/17/2021 6:43 AM, warthodson at aol.com
>>     <mailto:warthodson at aol.com> wrote:
>>>     Bob,
>>>     The way the vendors find out about an issue is if the customer
>>>     tells them.  You should forward your message to Moss.
>>>     Gary Hodson
>>>
>>>
>>>     -----Original Message-----
>>>     From: Bob Spidell <bspidell at comcast.net>
>>>     <mailto:bspidell at comcast.net>
>>>     To: Healeys <healeys at autox.team.net> <mailto:healeys at autox.team.net>
>>>     Sent: Sat, Oct 16, 2021 7:52 pm
>>>     Subject: [Healeys] BN2 Fan Belt
>>>
>>>     I finally got around to fixing my loose water pump pulley and
>>>     installing a new fan belt. I ordered a 'cogged' belt from
>>>     Moss--part# 021-966--thinking it might work better than the
>>>     original slab of rubber. I noticed before installing that it was
>>>     narrower than the original type that I'd had, which had rotted,
>>>     but it looked like it would work. Once I started tensioning it
>>>     however, it was clear it /might /work, but sat too low in the
>>>     pulleys, and was essentially riding on the bottom of the pulley
>>>     grooves instead of on the sides (and the angle of the sides of
>>>     the belt was incorrect). Anyone else tried one of these?
>>>
>>>     I'm shocked, SHOCKED I TELL YA', that a vendor would sell
>>>     something that could possibly work, but isn't truly correct.
>>>
>>>     bs
>>>
>>
>>
>>     _______________________________________________
>>     Support Team.Nethttp://www.team.net/donate.html  <http://www.team.net/donate.html>
>>     Suggested annual donation  $12.75
>>
>>     Archive:http://www.team.net/pipermail/healeys  <http://www.team.net/pipermail/healeys>  http://autox.team.net/archive  <http://autox.team.net/archive>
>>
>>     Healeys at autox.team.net  <mailto:Healeys at autox.team.net>
>>     http://autox.team.net/mailman/listinfo/healeys  <http://autox.team.net/mailman/listinfo/healeys>
>>
>>     Unsubscribe/Manage:http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com  <http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com>
>>
>     -- 
>     Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here:WWW.PORTERBIKES.COM/  <http://WWW.PORTERBIKES.COM/>
>
>     _______________________________________________
>     Support Team.Net http://www.team.net/donate.html
>     <http://www.team.net/donate.html>
>     Suggested annual donation  $12.75
>
>     Archive: http://www.team.net/pipermail/healeys
>     <http://www.team.net/pipermail/healeys>
>     http://autox.team.net/archive <http://autox.team.net/archive>
>
>     Healeys at autox.team.net <mailto:Healeys at autox.team.net>
>     http://autox.team.net/mailman/listinfo/healeys
>     <http://autox.team.net/mailman/listinfo/healeys>
>
>     Unsubscribe/Manage:
>     http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>     <http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211017/0e229b19/attachment.htm>


More information about the Healeys mailing list