[Healeys] Sealing Head Studs

[Mark Fawcett]

I don't recall any of the studs needing to be sealed to prevent coolant
escaping. If you have coolant seeping out, I think I would look at the head
gasket.

Mark Fawcett
59 BT7

On Thu, Oct 14, 2021 at 2:37 PM m.g.sharp--- via Healeys <
healeys at autox.team.net> wrote:

> Has anyone out there had issues with coolant coming up the head studs?  I
> have heard that some stud holes in the block are blind, but some intercept
> coolant channels and that the head studs that go in these holes need to be
> sealed.  Does anyone know which holes are blind and which are not?
>
>
>
> Thanks for any insights.
>
>
>
> Mirek
>
> ’59 BT7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/m.fawcett@cox.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211014/04cfeb36/attachment.htm>