[Healeys] Hot Fuse

[Bob Spidell]

First, pull the fuse--when it's cold--and check its resistance.

On 10/13/2021 8:26 PM, Bob Spidell wrote:
> Fuses should have little or no resistance (resistance creates the 
> heat). Something is wrong; check for corrosion on the fuse and block, 
> cold solder, etc. (try a new fuse).
>
> Which fuse is it?
>
>
> On 10/13/2021 6:10 PM, R. Lindsay via Healeys wrote:
>> In my BJ8, I have a fuse that is very hot (can’t hold it).  I’ve 
>> measured amps and volts across the fuse. 1.3 amps and 14.5 volts. It 
>> is very hot. Should this be of concern or am I over reacting.
>>
>> Price Lindsay
>>
>> Cell: 630-841-6300
>> Email: 050.rpl at gmail.com
>>
>>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys 
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>