[Healeys] Frame drawing

[John Spaur]

I have two original workshop manuals. Each one has section R but one has only the frame isometric and the other has nothing.

 

Thanks for sending the drawings.

 

John

 

From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Harold Manifold via Healeys
Sent: Tuesday, November 23, 2021 8:21 PM
To: RT <rthrift at cox.net>; J. Scott Morris via Healeys <healeys at autox.team.net>
Subject: Re: [Healeys] Frame drawing

 

Richard,

 

I have these for the BT7 I scanned from the manual.

 

Harold

 

From: RT via Healeys <mailto:healeys at autox.team.net> 
Sent: Tuesday, November 23, 2021 7:47 PM
To: J Scott Morris via Healeys <mailto:healeys at autox.team.net> 
Subject: Re: [Healeys] Frame drawing

 

Beautiful! Are similar drawings available for BT7 ?

Thanks!
Richard Thrift

On November 21, 2021 at 11:33 AM "J. Scott Morris via Healeys" <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote: 

Hi Michael; I don't think the attached drawings are exactly what you are after but they may help. 

 

--Scott Morris; Simcoe, Ontario       - Keep Smiling, Murphy Lives 

 

 

On Saturday, November 20, 2021, 11:47:50 a.m. EST, Michael Salter via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote: 

 

 

I know this is a long shot but does anyone happen to have a dimensioned drawing of a 100 frame that they would be willing to share? 

CAD or otherwise would be great. 

 

M 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211124/e42c1800/attachment.htm>