[Healeys] Crankshafts

[Michael Salter]

No.
As far as the engine was concerned the modification only included the cam,
the distributor, valve springs, inlet manifold and carbs, and the cold air
box.
The 100S crankshaft however was different being made from EN40B and
nitrided.

M

On Sun, Nov 14, 2021 at 2:24 PM Robert Memler via Healeys <
healeys at autox.team.net> wrote:

> Is there any difference between a bn1 crank and a 100M crank? Under
> educated need to know.
> TIA  Bob Memler
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211114/183ff3cb/attachment.htm>