[Healeys] 6 cylinder gas tank in a 100/4
healeyguy at aol.com
Thu Nov 4 14:39:11 MDT 2021
You can use the metal filler neck from a Spridget and a little modification and get the cap positioned much closer to the rear of the car.
Sent from my iPhone
> On Nov 4, 2021, at 2:38 PM, Jean Caron via Healeys <healeys at autox.team.net> wrote:
> It may fit but I would not weld a neck on a six cyl tank that has been used in the past, nor would I cut the round hole, no matter how long it has not been used, there is still fumes in there, not worth it to me, I’d buy new.
> Sent from Mail for Windows
> From: richard mayor via Healeys
> Sent: November 4, 2021 11:30 AM
> To: healeys
> Subject: [Healeys] 6 cylinder gas tank in a 100/4
> I have rescued a BN1 with no gas tank. But, I have an extra 6 cylinder car gas tank. Has anyone fabbed up a filler neck for a 6 cylinder tank so I can keep the gas cap in the trunk and still be able to fill the tank easily?
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> Healeys at autox.team.net
> Unsubscribe/Manage: http://firstname.lastname@example.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Healeys