[Healeys] Door pull cables

sentenac.rw at gmail.com sentenac.rw at gmail.com
Sat May 29 11:01:57 MDT 2021


The Moss replacements I bought a year or two ago did have the bends.
And for whatever reason, the threading matched my original handles.

-Roland
BN1 #724

On Sat, 29 May 2021 12:54:13 -0400, you wrote:

>I wouldn't think it would be too hard to bend the levers but 2 things.
>1. BE VERY CAREFUL NOT to subject the die-cast parts to any force. They are
>easily broken.
>2. Check that your chrome handles do screw into the threaded holes in the
>levers. Early cars were BSF later cars are UNF.
>
>M
>
>On Sat., May 29, 2021, 12:44 p.m. Michael MacLean, <
>springer.mike51 at gmail.com> wrote:
>
>> OK, I must have the non-Healey mechanisms.  Lever with the threaded holes
>> are not bent, but straight up.  That certainly explains the problem I am
>> having.  Thanks Michael.  Would new latch mechanisms from the usual
>> suppliers have the correct bend?  How easy is it to bend the ones in the
>> car now?
>> Mike M
>>
>> On Sat, May 29, 2021, 8:23 AM Michael Salter <michaelsalter at gmail.com>
>> wrote:
>>
>>> The door latch mechanisms used on pre convertible Healeys were made by
>>> Wilmot Breeden and fitted to numerous makes and models.
>>> Many do not have the 2 bends in the operating arm like the Healeys as can
>>> be seen in my pic.
>>> That "offset" created by the 2 bends keeps the pull cable clear of the
>>> door frame.
>>> .
>>> M
>>>
>>> On Sat., May 29, 2021, 12:43 a.m. Michael MacLean via Healeys, <
>>> healeys at autox.team.net> wrote:
>>>
>>>> Can someone tell me how and where to attach the door pull cables on my
>>>> BN2?  I have been trying to put it under the flange of the chrome door
>>>> lever where it screws into the door shut mechanism, but it does not seem to
>>>> line up. The flanges of the inner door frame seem to be in the way.  I can
>>>> see the hole at the other end (front of door frame) for the other end of
>>>> the cable.  No problem there.  Just need a little info on how to mount the
>>>> cable at the mechanism.
>>>> Mike MacLean
>>>> _______________________________________________
>>>> Support Team.Net http://www.team.net/donate.html
>>>> Suggested annual donation  $12.75
>>>>
>>>> Archive: http://www.team.net/pipermail/healeys
>>>> http://autox.team.net/archive
>>>>
>>>> Healeys at autox.team.net
>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>
>>>> Unsubscribe/Manage:
>>>> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>>>>
>>>>

-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus



More information about the Healeys mailing list