[Healeys] Door pull cables

[Michael Salter]

Do your handles have the correct bend in them to offset the cable run?
M

On Sat., May 29, 2021, 12:43 a.m. Michael MacLean via Healeys, <
healeys at autox.team.net> wrote:

> Can someone tell me how and where to attach the door pull cables on my
> BN2?  I have been trying to put it under the flange of the chrome door
> lever where it screws into the door shut mechanism, but it does not seem to
> line up. The flanges of the inner door frame seem to be in the way.  I can
> see the hole at the other end (front of door frame) for the other end of
> the cable.  No problem there.  Just need a little info on how to mount the
> cable at the mechanism.
> Mike MacLean
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210529/de673be3/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210529_072650.jpg
Type: image/jpeg
Size: 377494 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210529/de673be3/attachment.jpg>