[Healeys] thread direction to adjust toe-in BJ8

Michael Salter michaelsalter at gmail.com
Wed May 12 19:38:58 MDT 2021

Unfortunately Tom the cross rod can be installed with the LHT at either end.
You need to clean and examine the thread to determine which way to turn the


On Wed., May 12, 2021, 9:05 p.m. Tom, <ah3000me at gmail.com> wrote:

> I would like to check my toe-in.  After pouring thru the list archives and
> BCF, I know one side of the cross rod is left hand thread and other is
> right hand thread, but I'm not sure which is which.
> The Moss catalog shows the left hand thread nut on the right side of the
> image...  Is that looking at the car from the front or from the driver's
> point of view?
> Anyone know which way to turn the locking nuts?
> thanks,
> Tom
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210512/9e6af8f8/attachment.htm>

More information about the Healeys mailing list