[Healeys] Dip Switch
Bruce Steele
healeybruce at roadrunner.com
Tue May 4 13:51:13 MDT 2021
Alex had a question about the dip switch on his BT7, Mike on a BN1 or 2.
Bruce Steele
Brea, CA
1960 BN7
From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of john harper
Sent: Tuesday, May 04, 2021 8:53 AM
To: Curtis Arndt <cnaarndt at gmail.com>
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Dip Switch
Gentlemen
I believe that you are confusing the way the switch is fitted on the 100 where it does through the footwell with later cars where it has its own bracket
On Tue, 4 May 2021 at 16:12, Curtis Arndt <cnaarndt at gmail.com <mailto:cnaarndt at gmail.com> > wrote:
It was designed to go in from the inside of the footwell since the Bakelite insulator is the same diamond shape as the hole in the foot well.
HOWEVER, as designed is not how they were produced! If you install them this way, they will short out! Ask Roger Moment and Richard Gordon how this does not work.
So in practice, at the factory the switch was inserted from the out/underside of the footwell. See photos of the correctly installed switch on my car.
Cheers,
Curt
On Fri, Apr 30, 2021 at 6:05 AM warthodson--- via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net> > wrote:
The question was, is it mounted on the "inside or the outside" of the diagonal part of the footwell in a BN1/2?
Gary H
-----Original Message-----
From: Patrick & Caroline Quinn via Healeys <healeys at autox.team.net <mailto:healeys at autox.team.net> >
To: 'Michael MacLean' <springer.mike51 at gmail.com <mailto:springer.mike51 at gmail.com> >
Cc: healeys at autox.team.net <mailto:healeys at autox.team.net>
Sent: Fri, Apr 30, 2021 5:46 am
Subject: Re: [Healeys] Dip Switch
Hello
It comes up through the diagonal part of the footwell unlike the 100/6 and 3000s.
Hoo Roo
Patrick Quinn
Blue Mountains, Australia
From: Healeys [mailto:healeys-bounces at autox.team.net <mailto:healeys-bounces at autox.team.net> ] On Behalf Of Michael MacLean via Healeys
Sent: Friday, 30 April 2021 2:33 PM
To: Ahealey help
Subject: [Healeys] Dip Switch
Can someone tell me if the dip switch in a BN1/2 is mounted inside the car or outside from underneath?
Mike MacLean
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys at autox.team.net <mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
Healeys at autox.team.net <mailto:Healeys at autox.team.net>
http://autox.team.net/mailman/listinfo/healeys
Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210504/4675c45f/attachment.htm>
More information about the Healeys
mailing list