[Healeys] uneven idle

[Kees Oudesluijs]

Check valve clearance, compression and timing first, before fiddling 
with the carbs. When that done, balance the carbs and set the idle 
mixture using the traditional method or using Colortunes.

Kees Oudesluijs



Op 23-3-2021 om 03:59 schreef Leonard Berkowitz via Healeys:
> Hi all
>
> I have been noticing that the idle speed changes every time I stop.  I 
> just replaced the jets on my BJ7, but the problem existed with the 
> original jets also.  The engine doesn't stall but the idle speed can 
> drop way down. any suggestions?  Runs really nice otherwise.  Just a 
> little difficult to start.
>
> Len B
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210323/5545dd58/attachment.htm>