[Healeys] P-Clip locations

[Bob Haskell]

Did the clips fitted to the 100s have a different finish - yellow zinc 
instead of clear zinc?

Cheers,

Bob Haskell
Austin Healey 3000 BN7/BT7 registrar

On 6/10/21 3:32 AM, Eric Metzner wrote:
> Harold and Jean,
> many thanks for your support, very helpful and appreciated. CSR looks 
> promising, will get in touch with them.
> Cheers
> Eric
>
> Von meinem iPhone gesendet
>
>> Am 09.06.2021 um 19:38 schrieb gradea1 at charter.net:
>>
>> Here are the P-clips shown on an early BN1. There is one large one 
>> needed (called main harness clip) which is at the junction of the 
>> harness into the firewall bulkhead (large hole).  Its a sorting 
>> puzzle, but the size of the harness at the selected hole determines 
>> the proper clip to use. Hank
>>
>> -----------------------------------------
>>
>> From: "Eric Metzner"
>> To: "David Nock BCS"
>> Cc: "Ahealey help"
>> Sent: Wednesday June 9 2021 9:40:32AM
>> Subject: Re: [Healeys] P-Clips
>>
>> Hey Listers, in addition  to the screw question I’m struggling with 
>> the amount and sizes of the different p-Clips needed for a BN1. 
>>  Couldn’t find any information related on that, suppliers available 
>> in Europe only state „small, medium, large“ but no info about how 
>> many of each are needed.
>>
>> Thanks a lot in advance
>> Eric
>> BN1, October 1954
>>
>> Von meinem iPhone gesendet
>>
>>     Am 09.06.2021 um 17:26 schrieb David Nock BCS
>>     <healeydoc at sbcglobal.net>:
>>
>>     
>>     The firewall they were 10/32 machine screws with nuts on the
>>     inside. Then along the frame rail and other locations they would
>>     have been a #8 sheet metal screw.
>>     David Nock
>>     healeydoc at sbcglobal.net
>>     209 948 8767
>>     www.britishcarspecialists.com
>>
>>
>>     *From:* Roland Wilhelmy
>>     *Sent:* Tuesday, June 08, 2021 7:38 PM
>>     *To:* Michael MacLean
>>     *Cc:* Ahealey help
>>     *Subject:* Re: [Healeys] P-Clips
>>     They were sheet metal screws. I need to check the head shape and
>>     size (6 or 8). But if you aren't worried about Concurse just use
>>     the smallest size that will fit your holes.
>>     -Roland
>>     On Tue, Jun 8, 2021, 6:41 PM Michael MacLean
>>     <springer.mike51 at gmail.com> wrote:
>>
>>         Can someone tell me what size and type fastener was used to
>>         install wiring harness P-clips in places like the engine bay?
>>         Was it sheet metal screws?  It would be a lot easier to
>>         install the clips if I didn't have to put a nutsert in all
>>         those places in the engine bay of my BN2.
>>         Mike MacLean
>>         _______________________________________________
>>         Support Team.Net http://www.team.net/donate.html
>>         <http://www.team.net/donate.html>
>>         Suggested annual donation  $12.75
>>
>>         Archive: http://www.team.net/pipermail/healeys
>>         <http://www.team.net/pipermail/healeys>
>>         http://autox.team.net/archive <http://autox.team.net/archive>
>>
>>         Healeys at autox.team.net
>>         http://autox.team.net/mailman/listinfo/healeys
>>         <http://autox.team.net/mailman/listinfo/healeys>
>>
>>         Unsubscribe/Manage:
>>         http://autox.team.net/mailman/options/healeys/sentenac.rw@gmail.com
>>         <http://autox.team.net/mailman/options/healeys/sentenac.rw@gmail.com>
>>
>>     ------------------------------------------------------------------------
>>     _______________________________________________
>>     Support Team.Net http://www.team.net/donate.html
>>     <http://www.team.net/donate.html>
>>     Suggested annual donation  $12.75
>>
>>     Archive: http://www.team.net/pipermail/healeys
>>     <http://www.team.net/pipermail/healeys>
>>     http://autox.team.net/archive <http://autox.team.net/archive>
>>
>>     Healeys at autox.team.net
>>     http://autox.team.net/mailman/listinfo/healeys
>>     <http://autox.team.net/mailman/listinfo/healeys>
>>
>>     Unsubscribe/Manage:
>>     http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
>>     <http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com>
>>
>>     _______________________________________________
>>     Support Team.Net http://www.team.net/donate.html
>>     <http://www.team.net/donate.html>
>>     Suggested annual donation  $12.75
>>
>>     Archive: http://www.team.net/pipermail/healeys
>>     <http://www.team.net/pipermail/healeys>
>>     http://autox.team.net/archive <http://autox.team.net/archive>
>>
>>     Healeys at autox.team.net
>>     http://autox.team.net/mailman/listinfo/healeys
>>     <http://autox.team.net/mailman/listinfo/healeys>
>>
>>     Unsubscribe/Manage:
>>     http://autox.team.net/mailman/options/healeys/ericmetzner@gmx.de
>>     <http://autox.team.net/mailman/options/healeys/ericmetzner@gmx.de>
>>
>> <engine F.JPG>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net
>