[Healeys] OD Switch

[R. Lindsay]

I removed the dash switch and installed a warning light in its place.

 Glenn MG did not have the shifter switch. I had it at home and didn’t touch it. 

It goes in one way. There is a notch in the switch and a tag in the housing to prevent it from turning 

I presume the plunger is going up when activated and down when powered off. I’m going to check that.  There are a couple of loose wires from other gauges. Maybe there is something shortening out there or elsewhere. I’ll check. 

Thanks for the help. 

Price Lindsay

Cell: 630-841-6300
Email: 050.rpl at gmail.com

Sent from my iPhone

> On Jun 1, 2021, at 12:07 PM, warthodson at aol.com wrote:
> 
> 
> Price,
> Please answer a few questions.
> When you converted from the O.E. dash mounted switch to the shift knob switch, did you disable the dash mounted switch? If yes, how did you do that? If no, it would be helpful if you could provide a wiring diagram showing how the 2 switches are wired into the OD circuit.
> When the trans/OD was rebuilt by Glenn's MG did they have the shift lever/switch? Is it possible they reversed the switch?
> Since the switch is currently operating opposite from the way you want it to work, why not simply remove it & flip it over & reinstall it?
> Gary Hodson
> 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210601/9b744c57/attachment.htm>