[Healeys] BJ-8 servo bracket

[David Nock]

The servo kit is a universal servo kit. That bracket is supplied to support the outer end of the cylinder. 

It is not alway needed but when used we install it around the end of the cylinder and then attach to the motor mount bracket bolt to the frame.

David Nock



> On Jul 17, 2021, at 8:42 AM, alfuller194--- via Healeys <healeys at autox.team.net> wrote:
> 
> Has anyone installed the aftermarket servo as sold by British Car Specialists (Nock)? The booster comes with no instructions, and we are trying to determine how to mount the ‘P’ shaped steady bracket. It looks like they took some effort to make it a particular shape and size, but I’ll be darned if I can see what it should mount to.  Here is a picture of the bracket in question:
>  
> <image001.jpg>
>  
> ----------------
> All the best,
>  
> Al Fuller
>  
> _______________________________________________
> Support Team.Net <http://team.net/> http://www.team.net/donate.html <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys <http://www.team.net/pipermail/healeys> http://autox.team.net/archive <http://autox.team.net/archive>
> 
> Healeys at autox.team.net <mailto:Healeys at autox.team.net>
> http://autox.team.net/mailman/listinfo/healeys <http://autox.team.net/mailman/listinfo/healeys>
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net <http://autox.team.net/mailman/options/healeys/healeydoc@sbcglobal.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210717/ceca85a2/attachment.htm>