[Healeys] Spark Plugs

[HealeyRick]

Bob,

The best way to find out who punches louvers in your area is to go to a
local hot rod show (when we can have them again), find the guys with
louvered cars and ask who did them.  Usually it's a hot rod shop.  You
should know the louvers won't look like the ones that were done on the
100M, the dies used to punch them were different than those used in the
US.  Another thing to consider is the amount of work prepping the louvers
for paint takes.  There's a lot of hand sanding required and getting
through the process without any slashes on your fingers while trying to
keep some of your fingerprints intact is a struggle.  Also, you'll need a
good painter as the paint sometimes runs around the ends of the louvers.
But if you like the look, it's all worth it in the end.

Happy and Healthy Healeying,
Rick Neville

On Wed, Jan 27, 2021 at 9:51 PM Bob Spidell <bspidell at comcast.net> wrote:

> The BJ8 they bought/sold on Wheeler Dealers a while back had a louvered
> bonnet. I'm intrigued, anyone know who can do this?
>
> I gap my mostly bone stock BJ8 with Pertronix at 0.028" ... no issues.
>
> Bob
>
> On 1/27/2021 3:52 PM, Richard Collins wrote:
> > I know it’s heresy but louvered hood and or rally vents on the wings
> > might help cool the engine compartment?
> >
> > Regards,
> > Richard C
> > BN7 440
> >
> >> On Jan 27, 2021, at 17:30, Don via Healeys <healeys at autox.team.net>
> >> wrote:
> >>
> >>  So to push this to the next level . With a 67 BJ8 with electronic
> >> ignition, in the Florida heat , is 32 gap or 30 ? And how much
> >> advance ?  With DW headers  , ceramic coated , and his 2 inch exhaust
> >> system and AHSPARES tubular intake manifold, which I had ceramic
> >> coated  😊  I’m still getting a lot of heat vapor lock . I’ve wrapped
> >> the headers , wrapped the fuel lines , and installed Joe Couture SU
> >> float bowl insulation wraps . Along with a new AHSPARES radiator and
> >> an electric fan , pusher in front of the radiator. And in minimal
> >> traffic, I still have to deal with vapor lock . When I did the frame
> >> off restoration 10 years ago , I used a AHSPARES electronic fuel pump
> >> . Any thoughts or comments?
> >>       Thanks , Don
> >>
> >> Sent from my iPhone
> >>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healeyrik@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210128/680069ce/attachment.htm>