[Healeys] Replacing Heater Valve on BJ8

[healeyguy at aol.com]

An added note on this subject.  If you are changing of just repairing the heater valve and have dropped the heater assembly, now is the time to replace the heater hoses. Attach the hoses and the valve control cable to the heater / valve, and push the end of the hoses through the firewall prior to lifting the healer into place. Don't forget the firewall grommets. I usually remove the right side seat to make a little more room. 


> Subject: [Healeys] Replacing Heater Valve on BJ8
>
> Listers,
>
> My heater valve sprung a leak (ironically, when it's in the 'off'
> position). I've replaced it before, and remember it being a real PITA
> (underdash work is my least favorite). Anyone have some tips or workarounds?
> I have a radio, so it's gotta come out--not a big deal--but do I have to
> pull the gearbox cover (a bit bigger deal)?
>
> TIA,
> Bob
>

_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeyguy@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210114/3ce80e3e/attachment.htm>