[Healeys] BN2 Caster Angle

[Bob Spidell]

A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 659887 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210106/8194716c/attachment.jpeg>
-------------- next part --------------


> On Jan 6, 2021, at 10:06 AM, healeyguy--- via Healeys <healeys at autox.team.net> wrote:
> 
> If the whole weight of the car was sitting on the bottom of the kingpins then we would have a bigger friction problem since there is not a supporting surface, in the vertical direction, between the kingpin and the stub axle assembly. The supporting surface is the thrust washers in the upper trunnion. 
> P
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net
>