[Healeys] Trunk Lid Seal

[john harper]

Remember to make the joint at the bottom centre. If top rain may still get
in.

On Wed, 6 Jan 2021 at 09:16, Bluehealey <bluehealey at gmail.com> wrote:

> Hi Mike.
>
> Enjoy
> Alan - from my iPad
>
> On 6 Jan 2021, at 06:54, Michael MacLean <rrengineer.mike at att.net> wrote:
>
> 
> In the picture included with this post you can see a cross sectional view
> of the rubber boot lid seal that I purchased from Moss.  Can someone tell
> me which edge(s) gets to glued to what surface on the underside of the boot
> lid?  There are no surfaces that are 90 degrees to each other.  Kind of
> confusing.
> Mike MacLean
>
> <seal1.jpg>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/bluehealey@gmail.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210106/77d40133/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 145144 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210106/77d40133/attachment.jpeg>