[Healeys] 100 rocker shaft question

[WILLIAM B LAWRENCE]

Yeah, I’ve never had times with these, but it looks like they are an interference fit. Probably heat them with a propane torch to loosen them and drive the shaft out with a soft hammer.

Bill Lawrence
BN1 #554
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Alan Seigrist via Healeys <healeys at autox.team.net>
Sent: Sunday, February 28, 2021 12:18 AM
To: Healey list <Healeys at autox.team.net>
Subject: Re: [Healeys] 100 rocker shaft question

Looks to me I have to heat them up - will they slide on or do I hammer them on when hot?


On Sun, Feb 28, 2021 at 8:04 AM Alan Seigrist <healey.nut at gmail.com<mailto:healey.nut at gmail.com>> wrote:
All -

either me or a previous mechanic bunged up the banjo bolt hole on my rocker shaft.  either way I have to replace the pedestal.

Is there an easy way to remove the pedestals from the rocker shaft so I can replace the broken one?

Best,

Alan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210228/021a3162/attachment.htm>