[Healeys] Wiper Motor Bushings

[Michael MacLean]

 As many different solutions as there are list members.  Other than finding the supplier that provides the soft rubber bushings, I like the idea of the diagonal slice.  I just don't want to spend all afternoon on a job that should take only 15 or 20 minutes to accomplish.  Believe me, my head is swimming from figuring out the wiring.  I think I have it kind of figured out, but I don't know for sure if the smoke will escape the wires the first time I turn the key.  As luck would have it, my kids ell me when I was at the parts store one afternoon while working on the MGB GT a guy in a F350 Ford truck stopped at the driveway and wanted to talk about the three British cars I have.  Turns out he lives in my housing tract and from what he says he worked for LUCAS back in the day.  I have yet to meet him, but I could sure use his help.  Most of my local club members are a two hour drive away. (San Diego AH club)  Good thing I have you guys to rely on.Mike MacLean

    On Wednesday, February 17, 2021, 10:38:13 AM PST, David P <frogeye at porterscustom.com> wrote:  
 
  
..or make the hole one drill bit size larger..or two. Silicon spray very helpful. 
 
 On 2/17/2021 11:31 AM, richard mayor via Healeys wrote:
  
 
Here's my experience trying to get those rock hard bushings into the holes on my BT7.  First, no amount of lube will allow it to happen.  I asked this same question on this forum about 2 years ago.  Got many of the same response - lots of lube, yada yada yada.  Finally, one poster gave me the solution.  Slice them open on one side.  But, make the cut at an angle - not parallel to the hole.  This way you can screw them into the mounting hole. Using some lube will also help. I recommend K-Y jelly.
  
  On Tue, Feb 16, 2021 at 9:12 PM Michael MacLean via Healeys <healeys at autox.team.net> wrote:
  
Can someone tell me how to get those humongous rubber bushings in place for my BN2 wiper motor?  I did it for the Bugeye 20+ years ago, but for the life of me I can't remember how I did it. Mike MacLean
 
 Sent from AT&T Yahoo Mail on Android  _______________________________________________
 Support Team.Net http://www.team.net/donate.html
 Suggested annual donation  $12.75
 
 Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
 
 Healeys at autox.team.net
 http://autox.team.net/mailman/listinfo/healeys
 
 Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/boyracer466@gmail.com
 
 
  
  _______________________________________________Support Team.Net http://www.team.net/donate.htmlSuggested annual donation $12.75Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archiveHealeys@autox.team.nethttp://autox.team.net/mailman/listinfo/healeysUnsubscribe/Manage: http://autox.team.net/mailman/options/healeys/frogeye@porterscustom.com -- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here: WWW.PORTERBIKES.COM/ _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/rrengineer.mike@att.net

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210218/dd824531/attachment.htm>