[Healeys] Hood latch

[Jim Ryan]

Which solution worked?

On Mon, Dec 27, 2021, 2:51 PM R. Lindsay <050.rpl at gmail.com> wrote:

> Thanks to everyone who replied. I’m now ready to go. Hood closes and stays
> there until I need to open it!
>
> Price Lindsay
>
> Cell: 630-841-6300
> Email: 050.rpl at gmail.com
>
> Sent from my iPhone
>
> On Dec 26, 2021, at 2:25 PM, Guy Coldwell <guido36 at att.net> wrote:
>
> On a 100 I use modeling clay tin the receiver to mark the location and
> tie a piece of string to the latch striker so that I can move it from
> outside.  I also mark the approximate position on the cowl with masking
> tape and use a nylon pry tool or scraper such as the ones sold by Harbor
> Freight tools to release/move the striker.
>
> https://www.harborfreight.com/4-piece-nonmarring-scraper-set-95832.html
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/050.rpl@gmail.com
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ryan@jimryan.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211227/b225ff98/attachment.htm>