[Healeys] Hood latch

[Guy Coldwell]

On a 100 I use modeling clay tin the receiver to mark the location and tie a piece of string to the latch striker so that I can move it from outside.  I also mark the approximate position on the cowl with masking tape and use a nylon pry tool or scraper such as the ones sold by Harbor Freight tools to release/move the striker.

https://www.harborfreight.com/4-piece-nonmarring-scraper-set-95832.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211226/d0a6295a/attachment.htm>