[Healeys] Quick Jack installed on frame.

[Michael Salter]

The problem with jacking on the pumpkin is that on some designs the lowest
point on the pumpkin is actually not that strong and if it bends up the
crown wheel will rub on the case eventually wearing through it. (Don't ask
me how I know).

M

On Mon, Dec 13, 2021 at 12:01 PM Mark Fawcett <m.fawcett at cox.net> wrote:

> I've had a QJ for about 5 years and have raised my BT7 on the
> outriggers many times. I never gave it any thought. Maybe I've been lucky,
> but it's always been stable.
>
> Mark Fawcett
>
> On Mon, Dec 13, 2021 at 8:32 AM Bob Begani <rfbegani at gmail.com> wrote:
>
>> Installed on frame. Question is can you install on out riggers shown
>> below or other place so you can increase the working area in the center of
>> the car
>>
>>
>>
>>
>>
>> Maybe fill in voids with trimmed 2x4?
>>
>> Let me know what you do for positioning the lift under the frame of a
>> BJ8HEALEYS
>>
>> Bob Begani
>>
>> Sent from my iPhone_______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>>
>> Archive: http://www.team.net/pipermail/healeys
>> http://autox.team.net/archive
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/m.fawcett@cox.net
>>
>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211213/f2db48a3/attachment.htm>