[Healeys] Sealing washers for tappet covers

[David Nock]

MG B  uses a cup washer and rubber seal. We install on all rebuilds. Works great. The front cover use thread sealer and copper washers. 

David Nock

Sent from my iPhone

> On Dec 4, 2021, at 4:54 AM, Simon Lachlan via Healeys <healeys at autox.team.net> wrote:
> 
> 
> A few years ago there was a brief thread regarding how one might stop oil oozing out where the bolts go through the three tappet covers on the side of Big Healey engines.
> Someone suggested that Subaru, of all people, made a washer that was exactly right. And he gave the part number.
> I bought a pack of 5 and they work really well.
> Latterly, someone else requested the info regarding these washers. Nobody replied with the info and I could only tell him that I’d lost the little packet.
> I was looking for something else last night when I found them.
> If you’re still out there and still leaking, they call themselves “Seal washer, RKR CVR”.
> The part number is 812764110.
> Simon
>  
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> 
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeydoc@gmail.com
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20211204/b171b8f0/attachment.htm>