[Healeys] Speedo Drive Thread Size?
warthodson at aol.com
warthodson at aol.com
Mon Aug 9 09:13:46 MDT 2021
Bob,If you had one available, how would you go about checking the thread angle? Gary Hodson
-----Original Message-----
From: Bob Haskell via Healeys <healeys at autox.team.net>
To: Harold Manifold <manifold at telus.net>; john harper <ah100tech at gmail.com>; Hank Leach <gradea1 at charter.net>
Cc: healeys at autox.team.net <healeys at autox.team.net>
Sent: Sun, Aug 8, 2021 7:14 pm
Subject: Re: [Healeys] Speedo Drive Thread Size?
Harold,
As has been pointed out in separate emails, there are two standards that
include 3/4" dia with 26 TPI. British Standard Cycle with thread angle
of 60 degrees and British Standard Brass with a thread angle of 55
degrees. Since the speedo drive is brass I would suspect the latter,
but I don't have one handy to check.
Cheers,
Bob Haskell
Austin Healey 3000 BN7/BT7 registrar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210809/96ead4b1/attachment.htm>
More information about the Healeys
mailing list