[Healeys] 3000 lifters

Michael Salter michaelsalter at gmail.com
Mon Aug 9 16:56:59 MDT 2021


I had never heard of that trick Richard.
I presume that the flat didn't go all the way to the bottom?

M

On Mon, Aug 9, 2021 at 1:13 PM richard mayor via Healeys <
healeys at autox.team.net> wrote:

> In my race car (a 3000) I run MGC bucket lifters. They have a small hole
> in the side that allows oil to exit.  The stock pedestal lifters are
> heavier than bucket lifters, put more side load than bucket lifters and
> fill up with oil. The old trick for racers using pedestals was to machine a
> flat on the lower side of the pedestal to allow oil to  drain.
>
> Richard Mayor
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210809/d66b1e90/attachment.htm>


More information about the Healeys mailing list