[Healeys] BN2 Brake Problem

[Michael Salter]

May be some useful information in here.
https://www.netbug.net/blogmichael/2017/08/21/bleeding-austin-healey-4-wheel-drum-brakes/

M

On Fri., Apr. 23, 2021, 11:12 p.m. Bob Spidell via Healeys, <
healeys at autox.team.net> wrote:

> Listers,
>
> I have a problem with my BN2's brakes that is driving (heh) me up the
> wall. Here's what I've done:
>
> - new shoes and cylinders in both rear wheels
> - one new cylinder in one front wheel (there's a total of 4 in the 2
> front wheels)
> - new master cylinder
>
> I hadn't touched the M/C, so after all the installs I just pressure bled
> as I usually do (this has worked well on my BJ8 for decades and a couple
> times for the BN2). At first, I got decent pedal then, after a period of
> time I lost it; the pedal would go to the floor with only slight
> pressure (probably from the return springs). Thinking it could only be
> the M/C, I sprung for a new TRW brand M/C but after installing it and
> bleeding I got the same results. I've put 2 full quarts of Castrol's
> finest 'synthetic' DoT4 through the system and tried vacuum bleeding and
> old-fashioned 'pump and hold' method; same result for all methods. I'm
> not losing fluid as far as I can tell, and the pedal will pump up a bit
> with a half-dozen or so strokes, but will go back to the floor after
> some time.
>
> Any and all ideas and suggestions accepted and welcomed.
>
> TIA,
> Bob
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210424/9fff150a/attachment.htm>