[Healeys] BN2 Rear Trans Mount

[john harper]

Michael

You don't how it is bent but should the car have been in a heavy shunt the
only thing that holds the heavy engine and gearbox from going forward is
the tie rod. If this part of the cross member is bent it could reduce the
distance from the fan to the radiator.



On Wed, 21 Apr 2021 at 06:52, Michael MacLean via Healeys <
healeys at autox.team.net> wrote:

> At the moment I am under my BN2 and noticed the rear transmission mount
> looks bent. The frame does not look like it has been hit in the front, but
> who knows?  It seems to me this is not right.  Do I need to straighten this
> or will it make a difference in installing the drive train?
> Mike MacLean1
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210421/c738c54b/attachment.htm>