[Healeys] Bonnet release rod question

[Steven Kingsbury]

Richard,
   Here's my setup. I hope this helps and I hope I took a photo of what you need. My spring has be covered with a sleeve by the previous owner. 
Steven Kingsbury
BN1





On April 18, 2021 at 5:45 PM, richard mayor via Healeys <healeys at autox.team.net> wrote:


I am reassembling the bonnet release rod mechanism and I need a photo of how the rod return spring is attached to the rod and to the small 90 degree clip that is bolted to the shroud support.

Thanks,  Richard



_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/airtightproductions@icloud.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210419/5bb3f05e/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PXL_20210419_185134299.jpg
Type: image/jpeg
Size: 2986103 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210419/5bb3f05e/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: PXL_20210419_185100356.jpg
Type: image/jpeg
Size: 2246084 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210419/5bb3f05e/attachment-0003.jpg>