[Healeys] Wiring Harness?

[Michael MacLean]

When I was given a BN2 wiring harness from my late friend.  I have had to buy small sub harnesses to supplement it.  So far, the harness has been correct for the installation, except for the harness in the picture.   In the upper right of the picture the multiple leads have 4 green w/purple stripe bullet end wires.  There is also 4 red wires, 3 black wires and one green w/black stripe wire.  I have been all over the BN2 wiring diagram you see below the harness and I can only come up with one green with purple stripe wire that runs between the flasher relay box and the hydraulic stop light switch.  Anyone have any idea what this harness is for?  There is also two smaller branches that end with 3 wires, a red, a black and another green with purple stripe!  Does this sound familiar with someone's six cylinder car?Mike MacLean



Sent from AT&T Yahoo Mail on Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20210406/5ad99344/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210405_165640.jpg
Type: image/jpeg
Size: 4542261 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20210406/5ad99344/attachment-0001.jpg>