[Healeys] Rear Quarter Panel Screws BT7

[Harold Manifold]

Hello,
 
The interior on my Healey BT7 was in very poor condition when I purchased
the car. I am making the the rear quarter panels and noticed some Healey's
from the same time frame as mine have two screws holding the rear quarter
panel in place. It looks like the screws go through the wheel well and then
secure the bump stops. I have the the original wooden pieces which are in
very poor shape but definitely no holes. The car in question was
manufactured in November 1960 and is towards the end of the BT7 Mk1
production.
 
Were these holes added by the factory or are they aftermarket?
 

 
Thanks for your help.... Harold
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201025/5b5ff796/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Rear Quarter Panel Screws.JPG
Type: image/jpeg
Size: 97882 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20201025/5b5ff796/attachment.jpe>