[Healeys] Not Healey suspension

Kees Oudesluijs coudesluijs at chello.nl
Sun Nov 29 01:47:52 MST 2020


  Add a 20A or 30A relay in the circuit and you will certainly be OK. In 
general an air compressor will not use an awful lot of Amps. It may well 
be that the switch you have is sufficient. A rough give away of the Amps 
used would be the thickness of the wires to the compressor.

Kees Oudesluijs



Op 29-11-2020 om 02:52 schreef llennep--- via Healeys:
> Hello Listers
> Off the Healey topic.  There is air ride suspension on my recent hot 
> rod purchase.  I wish to add a manual on-off switch to control the air 
> compressor.  It is a bit difficult to get to the air compressor to 
> check its label so can anyone give me an idea - what would be the 
> minimum amp rating for the switch?  I currently have a toggle switch 
> on it that is rated at 6 amp I believe it is.
> Keith
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201129/dbd50b67/attachment.htm>


More information about the Healeys mailing list