[Healeys] Update on mystery leak

Leonard Berkowitz DrBerkowitz at hotmail.com
Mon Nov 23 19:09:57 MST 2020


I think I solved the problem of accessing the carb mounting bolts. I have a 1/2inch distributor hold down bolt wrench. Probably from one of my dad’s GM vehicles from the 60’s.  It is a 1-2 inch box wrench. I cut it to convert it to an open end wrench. Then I reshaped it so it would fit into the limited space and angle. It seems to have worked. Will update when Inget the carbs off so I can verify the leak.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20201124/d97edcde/attachment.htm>


More information about the Healeys mailing list