[Healeys] Sealants and fasteners

[Curtis Arndt]

Regarding fastener markings, Whitworth versus Unified. Here's a page from
my 1957 Machinery's Handbook.

My go to thread gauges.

Cheers,

Curt

On Sun, May 31, 2020 at 1:08 PM Curtis Arndt <cnaarndt at gmail.com> wrote:

> Gentlemen,
>
> Here are two draft articles on British and Austin Healey Fasteners that I
> will be putting on my blog site later this Summer after I retire. Not yet
> complete, but a good start.  The article on strength rating codes took me
> 20 years to research!
>
> Cheers'
>
> Curt
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200531/e412026f/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Machinerys Handbook British Unified Fastener Markings.pdf
Type: application/pdf
Size: 32605 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200531/e412026f/attachment-0001.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Thread Pitch Gauges.jpg
Type: image/jpeg
Size: 4233167 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200531/e412026f/attachment-0001.jpg>