[Healeys] Broken Screw

[alfuller194 at gmail.com]

Mike – if anyone in your area does EDM electronic discharge/disintegration work, that might be the way to get it out without damaging anything in the process.

 

----------------

All the best,

 

Al Fuller

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Michael MacLean
Sent: Monday, May 25, 2020 3:01 PM
To: Healeys <healeys at autox.team.net>
Subject: [Healeys] Broken Screw

 

Went to install the rebuilt horns on my BN2 last night and could only screw one on the cross member of the frame.  The other mounting hole were a problem.  Somewhere, sometime in the past whoever removed the horns snapped one of the screws off flush with the frame.  Best way to get this out?  Must have been corroded in place to snap off like that.  

Mike MacLean

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200525/23e68920/attachment.htm>