[Healeys] Thread Size for Overdrive operating Valve Plug

Michael Salter michaelsalter at gmail.com
Sat May 23 13:36:11 MDT 2020


Struggled with that for a while then had a eureka moment  ... braize an
adaptor onto the top of an old plug after drilling a hole through it and
viola 😊


On Sat., May 23, 2020, 2:34 p.m. , <jpaynepbr at cox.net> wrote:

> Anybody know what the official size designation and thread is for the
> Overdrive Operating Valve Plug?
>
>
>
> Trying to fit up a pressure gauge, and having issues finding the right
> adapter.  The Major OD of the plug is .49”, and the British standard pipe
> taper and parallel major OD is .51”, so they aren’t going in.
>
>
>
> Thanks,
>
>
>
> Jonas
>
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200523/729bf4b2/attachment.htm>


More information about the Healeys mailing list