[Healeys] Stolen Healey

[Jim Ryan]

Saw this in the AH experience forums.  I just thought I would post it here
in the event anybody sees this vin number.

  Anne MacKenzie
#25
Re: Any hope for a stolen AH 3000
Send PM <https://www.ahexp.com/phorum/pm.php?3,page=send,message_id=224032>
Today by stolen3000 <https://www.ahexp.com/member/stolen3000.128090/>
Mahone Bay, NS, Canada   [image: CAN]


Steve,
I was so encouraged by your post regarding the Registry that I really
started to wonder where I could obtain any valuable identification
information. All the documentation ---registration, insurance, manuals
etc.--- was in the glove box when the car was stolen. As I mentioned , I
have only 5 original keys. I do believe one is for the glove box and there
are duplicates for the ignition and the boot.
However, I started to look through all my books in case I had slipped
something in any of them and imagine my joy when I found a plastic envelope
containing a grease covered little book entitled "Your Passport to BMC
service" On the inside cover it gives my name, address and the following
information:
MAKE: Austin Healey
MODEL: 3000 MkIII
Serial No. 26851
Engine No. 1556
Original Licence Date :June 20, 1964
Mileage: 114
Selling Dealer: C.J. Slauenwhite's Garage, Lawrencetown, NS

Is any of this information useful?
Anne

On Sun, May 3, 2020, 8:57 AM Perry via Healeys <healeys at autox.team.net>
wrote:

> Michael
>
> 100 Tappets-
>
> Diameter 0.99875-0.99925
>
> Length (overall) 3.02625-3.03675
>
>
>
> Six cylinder Tappets are slightly smaller diameter and nearly a ½ inch
> shorter.  All six cylinder tappets have 8 holes. I do not have any 100
> tappets out of an engine right now so the number of holes would have been
> an early morning unknown for me, except for a photo in my 100 Service
> Manual that shows the 100 tappets had 8 holes. 😊
>
> Perry
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
> *From: *Michael MacLean <rrengineer.mike at att.net>
> *Sent: *Sunday, May 3, 2020 1:46 AM
> *To: *Healeys <healeys at autox.team.net>
> *Subject: *[Healeys] Saturday Night Rant
>
>
>
> Here's today's Healey 100 rant.  As you can see in the picture of the
> eight lifters, two are not the same as the rest.  I bought these several
> years ago from Vicky Brit and they all had the same part number, but they
> are not the same.  Two of them have eight holes in the body.  The rest have
> three holes.  The two that are different are almost an eighth of an inch
> shorter than the other six.  That can't be good.  These are the things I
> run into that slows progress on this engine.  I suspect the two different
> ones are for a different application.  Can someone tell me what the correct
> overall height of a 100-4 cam follower is?  For all I know I might only
> have two correct lifters.
>
> Mike MacLean
>
>
>
>
>
> Sent from AT&T Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
>
> Archive: http://www.team.net/pipermail/healeys
> http://autox.team.net/archive
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/ryan@jimryan.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200503/5819ae3c/attachment.htm>