[Healeys] Oil additives -- great informaton. Thanks.

warthodson at aol.com warthodson at aol.com
Sat May 2 07:32:48 MDT 2020


The best price I could find for Valvoline VR-1 20w50 on Wallmart's site was $7.03/quart & it was shipping from "Zoro", who ever that is. The next best price was $9.11/quart shipping from Speedway. Gary Hodson


-----Original Message-----
From: Bob Spidell <bspidell at comcast.net>
To: healeys at autox.team.net
Sent: Fri, May 1, 2020 11:10 pm
Subject: Re: [Healeys] Oil additives -- great informaton. Thanks.

 Walmart had no problem shipping me a crap-ton of Valvoline VR-1 20W-50; still don't understand why the outfit in the Midwest I bought from before refused to ship to me.  The Valvoline saga has some strange twists, a few years ago my favorite parts house 'had to pull it off the shelves;' I never got an explanation there, either.  I haven't seen it on any parts house shelves since, but as long as Wallymart will ship for free @ less than $4/qt I'll be happy.
 
 Bob
 
 
 On 5/1/2020 10:30 AM, wwycoffbn7--- via Healeys wrote:
  
 
    Hi,  Thanks all.  As is usual there is a lot of good discourse and experience shared by the list.  What triggered my question on oil and oil additives was the observation of a bottle of Red Line 10W40 image that did not display the usual statement that it contains ZDDP.  For decades I have used that oil as it carries proper oil pressure, suites the climate, etc.  However, if Red Line stopped including ZDDP, I would find another oil.  I also recalled that some time back, Bob Spidell having to find a new outlet for Valvoline 20W50 as it seemed that it no longer cleared some California rule changes.  I wondered it this happened to Red Line.   So, I sent off an inquiry to Red Line and not getting a rapid response sent one to our Healey group.  The Healey group was much faster to respond.  While most business are slowed down by COVID-19, a Red Line response did come.  The assurance is that Red Line Motor Oil 10W40 (SKU 11404) contains good ZDDP levels, plenty for an Austin Healey's flat tappet cam and lifters; 1225ppm zinc and more importantly 1375ppm phosphorus.
 
  As to their break in additive, their Web site indicates that a half bottle is enough to add to a conventional oil.  It also has bit of sulfur, 16.6 grams.  I have to wonder if adding it to their 10W40 could result in too much.  I am just not inclined to experiment.   The 3000’s owner’s manual only mentions 30 weight oil, even for tropical heat.  However, the “Work shop Manual” (the Green Book) has a much more expansive table that promotes a lot of weights depending on the manufacturer.  The aspect that modern oils are a bit different than those available when the book came out adds a bit more uncertainty.     I am confident using the 10W40.  I used 10W50 in my Triumph, but it was an air-cooled engine and was REAL hard to start in freezing weather.  There were also a lot of reputable recommendations that led me to Red Line’s 10W40.  The oil pressure is proper, so I don’t see an upside for me to use a heavier oil.   Many thanks to the folks who responded.     Bill  
  
  
     
 
 _______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75

Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/warthodson@aol.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200502/daa0906b/attachment.htm>


More information about the Healeys mailing list