[Healeys] Paddy Hopkirk pedal extension

[Mark Donaldson]

Chris,  Can you show us a bit more of your accelerator pedal and drop arm?

And what is the round piece at the base of the accelerator pedal – a heel rest perhaps, or part of the pedal?

 

Mark

 

From: Chris Dimmock <austin.healey at gmail.com> 
Sent: Saturday, 2 May 2020 5:07 p.m.
To: Roger Grace <roggrace at telus.net>
Cc: alfuller194 at gmail.com; Mark Donaldson <ardmorebusiness at xtra.co.nz>; healeylist <Healeys at autox.team.net>
Subject: Re: [Healeys] Paddy Hopkirk pedal extension

 

I also changed the pedal spacing, and made my own accelerator pedal to better enable heel/ toe. 

 







On 29 Apr 2020, at 4:07 am, Roger Grace <roggrace at telus.net <mailto:roggrace at telus.net> > wrote:



I also bought a set from DW. However didn't use their gas pedal or his dip switch idea. Found the DW gas pedal too big.

What I did do was to mount the clutch pedal not central to the lever but on the LHS. Made some tight fitting spacers with longer bolts. This gives an additional 1/2 in pedal separation.

rg

 

----- Original Message -----
From: alfuller194 at gmail.com <mailto:alfuller194 at gmail.com> 
To: 'Mark Donaldson' <ardmorebusiness at xtra.co.nz <mailto:ardmorebusiness at xtra.co.nz> >, 'Bruce Steele' <healeybruce at roadrunner.com <mailto:healeybruce at roadrunner.com> >, 'healeylist' <Healeys at autox.team.net <mailto:Healeys at autox.team.net> >
Sent: Tue, 28 Apr 2020 11:36:25 -0600 (MDT)
Subject: Re: [Healeys] Paddy Hopkirk pedal extension

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200502/96a434e9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 104145 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200502/96a434e9/attachment.jpg>