[Healeys] Tri-carb Heatshield

[alfuller194 at gmail.com]

Andy:

 

I had a tri-carb a while back, and found a few pictures of the engine. My pictures show what appear to be something pressed- or welded in that the cams rest upon [see picture inserted below]. I don’t recall if they were actually pressed, bolt heads, or ???

 

----------------

All the best,

 

Al Fuller

 



 

 

From: Healeys <healeys-bounces at autox.team.net> On Behalf Of Andy Sneddon
Sent: Tuesday, March 10, 2020 1:27 PM
To: healeys at autox.team.net
Subject: [Healeys] Tri-carb Heatshield

 

All,

 

  On the heatshield for the Tricarb, there are two holes which match up with where the cam on the throttle levers comes to rest.

 

  When I striped the carbs down there was a bolt head in each of these holes, which the cam came to rest upon, Hopefully as seen in the picture below.  However I can find no mention of these bolts in the parts list. – are they meant to be there?.   ….. and if not, why the hole? 

 

Andy

 



 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20200310/d40572bd/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 159255 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200310/d40572bd/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 197221 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20200310/d40572bd/attachment-0001.jpg>